Stainless Steel Pipe Fittings
Stainless Steel Elbow
Stainless Steel, Duplex SS, Nickel-based Alloy, Titanium etc.
What Is Stainless Steel Elbow
In stainless steel piping system, stainless steel elbow is used to change the flow direction in the pipe. According to its angle, the most commonly-used ones are 45°, 90° and 180°. And in some engineering projects, 60° elbow or other unconventional angle elbow are also required. Except for stainless steel, the materials of elbow we do also include alloy steel, nickel-based alloy, titanium alloy etc.
Available Standard of Stainless Steel Elbow
- ASME B16.9, MSS SP-43
- EN 10253-4, EN 10253-3
- ISO 05251
- GOST 1717375
- JIS B2311/2312/2313
Materials of Stainless Elbow
The materials of elbow we can offer include:
Stainless steel elbow: 304/304L,316/316L,310S,321,347H, 321H,317/317L, 904l, 254 SMO;
Duplex steel and super duplex elbow: SAF 2205, SDSS 2507;
Nickel-based alloy elbow: Inconel 600, 625, Incoloy 800, 825, Monel 400, Hastelloy C276, C22 etc.
Titanium alloy Gr.2, Gr.5, Gr5, Gr.12 etc.
Aluminium Alloy 6061, 5052 etc.
Stainless Steel Fittings
Techniques of Elbow
Generally, the main system of industrial pipelines is mainly connected through butt welding. To improve the welding quality, the end will be beveled to form an angle and edge based on standard requirements. ASME B16.25 Standard has specified for the beveled angle, and the allowable deviation and detection method. For stainless steel elbow, its surface quality and mechanical properties are basically the same as pipes. Due to the performance requirements and ease of welding, the materials of stainless-steel fittings are usually required to be of the same as the connected pipes.
Surface Conditon
All our butt-welded stainless steel pipe fittings including stainless steel elbow are treated with shot blasting and pickling passivation or sand-blasting, so that the surface of the pipe fittings will become clean, beautiful, and its corrosion resistance can be guaranteed. For those large pipe fittings which cannot be shot blasted, we usually use sand blasting to clean their surface. Besides, our factory also provides surface polishing or oscillating treatment to meet the requirements of different projects.
Have a Question?
If you have any requirements about the suface finish, please tell us. We support differentce surfaces conditions such as balsting-shot and pickling surface, sand-blasting surface, polished surface etc.
Show More Inspection
For stainless steel weld elbow, we will examine their dimension, surface condition and mechanical performance based on EN 10253-4 / EN 10253-3 and ASME B16.9. Our factory can also do other inspections based on the requirements of our clients.
About the inspection
Third party inspection is available for stainless steel pipe fittings, material certificate is to EN 10204 3.1 (the cost of 3.2 in buyer's account). If you need a sample certificate, please contact us >>
Contact Us Stainless Elbow
Packing of Elbow
For those elbows or pipe fittings without special packing requirement, if their size is 2” or below, we usually seal with plastic and then put them into plywood case. However, for the elbows of large size, we normally pack with pallets and give a protection for the beveled end. As for the pallets number, it will depend on the actual size of elbow. Undoubtedly, we will also mark the details in the packing, not limited to the size, materials, trademark, etc. We can also do color labeling for products according to customer requirements, so that they can rapidly distinguish the materials when the products arrive.
Have a Requirement? Contact Us Now >>
Facebook
Twitter
LinkedIn