Elbow Basic Introduction
This is the introduction of stainless steel elbow basic. Stainless steel elbow purpose: to connect two pipes with the same nominal diameter to make the pipeline bend.
Stainless steel elbows are very suitable for areas with high pressure, corrosive conditions and vibration. These elbows can be made of stainless steel of different ionic grades and designed at different angles to direct the liquid flow to a specific direction for uninterrupted flow to the destination. They are widely used in pipeline installations in many industries to achieve smooth and continuous flow. These elbows are made of the highest quality SS, which is non-reactive to chemicals and can ensure the supply of pollution-free water to commercial and residential premises.
Nominal Diameter | Outside Diameter at Bevel | Center to End | Center to Center | Back to Face | ||||||||||
45° Elbow | 90° Elbow | 180° Elbow | ||||||||||||
B | A | O | K | |||||||||||
DN | NPS | Series A | Series B | Long Radius | Long Radius | Short Radius | Long Radius | Short Radius | Long Radius A | Short Radius A | ||||
15 | 1/2 | 21.3 | 18 | 16 | 38 | – | 76 | – | 48 | – | ||||
20 | 3/4 | 26.9 | 25 | 19 | 38 | – | 76 | – | 51 | – | ||||
25 | 1 | 33.7 | 32 | 22 | 38 | 25 | 76 | 51 | 56 | 41 | ||||
32 | 1.1/4 | 42.4 | 38 | 25 | 48 | 32 | 95 | 64 | 70 | 52 | ||||
40 | 1.1/2 | 48.3 | 45 | 29 | 57 | 38 | 114 | 76 | 83 | 62 | ||||
50 | 2 | 60.3 | 57 | 35 | 76 | 51 | 152 | 102 | 106 | 81 | ||||
65 | 2.1/2 | 76.1(73) | 76 | 44 | 95 | 64 | 190 | 127 | 132 | 100 | ||||
80 | 3 | 88.9 | 89 | 51 | 114 | 76 | 229 | 152 | 159 | 121 | ||||
90 | 3.1/2 | 101.6 | – | 57 | 133 | 89 | 267 | 178 | 184 | 140 | ||||
