Why Liquid Cooling Demands Specialized AI Data Center Pipes
Table des matières
- Plaque
- Feuille
- Forgeage
- Barre ronde
- Bride
- Tuyaux
- Raccords
- Sur mesure
Contactez-nous pour plus d'informations
Locations for AI Data Center Pipes in Cooling Loops
Vertical stainless steel tubes are installed directly inside the server rack. These manifolds distribute the coolant evenly to 36 or 72 individual server blades. Round or square 316L stainless steel tubes are used, with the tube openings laser-drilled and the branch outlets precision-welded.
The technical cooling system connects the coolant distribution unit to the server rack. This circuit requires ultra-clean AI data center piping with smooth inner walls. Even the tiniest oxide particles can clog the 50-micrometer microchannels inside the copper GPU cold plate.
Use leak-free quick-connect fittings to insert the server blades into the rack manifold. These high-precision fittings are machined from cold-drawn 316L stainless steel bar stock and seamless tubing to ensure zero fluid leakage during hot-swap server maintenance.
The facility’s water system transfers heat from the heat exchangers in the atmospheric-pressure unit to the cooling towers. The main circuit uses large-diameter ASTM A312 Schedule 10S or 40S stainless steel piping.
AI Data Center Pipes VS Alternative Materials
| Matériau | Oxygen Permeation | Erosion Limit | Cleanliness Level | Expected Lifespan |
|---|---|---|---|---|
| Acier inoxydable 316L | Zéro | Up to 4.5 m/s | Ultra-High (ASME BPE) | Over 25 Years |
| Copper Tubing | Zéro | Under 1.8 m/s | Moderate (Oxide risk) | 10 to 15 Years |
| EPDM Rubber Hose | Haut | Up to 3.0 m/s | Low (Particle shedding) | 3 to 5 Years |
| Thermoplastic (PP-R) | Modéré | Up to 2.5 m/s | Haut | 10 to 15 Years |
| Acier Carbone | Zéro | Up to 3.0 m/s | Very Low (Severe rust) | Not Recommended |
Selecting the Best Alloy Grades for Server Cooling
316L is the gold standard for TCS circuits, rack manifolds, and internal piping in CDUs. It resists chloride pitting and acidic ethylene glycol corrosion, and ensures clean-track TIG welding without carbide precipitation.
It is recommended to use 304L stainless steel for the water pipes and structural bases of elevated freshwater treatment facilities. Compared to 316L stainless steel, it offers greater corrosion resistance and is less expensive.
Coastal AI data centers use slightly brackish water or seawater for primary cooling. The yield strength of 2205 duplex stainless steel is twice that of 316L, and it resists chloride stress corrosion cracking.
| Grade de l'alliage | Numéro UNS | Principaux éléments d'alliage | Primary Cooling Loop Application |
|---|---|---|---|
| 316L | S31603 | 16% Cr, 10% Ni, 2% Mo | Rack manifolds, QDs, CDU secondary TCS loops |
| 304L | S30403 | 18% Cr, 8% Ni | Facility water system (FWS) primary headers |
| 2205 Duplex | S32205 | 22% Cr, 5% Ni, 3% Mo | Coastal seawater primary heat rejection loops |
Dimensional Standards and Tolerances for AI Data Center Pipes
| Standard | Typical Size Range | OD Tolerance | Wall Tolerance | Primary System Zone |
|---|---|---|---|---|
| ASTM A270 / BPE | OD 12.7 to 101.6 mm | ±0.13 to ±0.25 mm | ±10% | TCS secondary loop & manifolds |
| ASTM A269 | OD 6.0 to 76.2 mm | ±0.13 to ±0.25 mm | ±10% to ±15% | CDU internal lines & sensors |
| ASTM A312 | NPS 1″ to 12″ | +0.40 to +1.60 mm | ±12.5% | FWS primary chiller loops |
| EN 10305-1 | OD 6.0 to 48.0 mm | ±0.08 to ±0.15 mm | ±7.5% to ±10% | High-precision QD connectors |
Internal Cleanliness and Surface Finish Requirements
As a professional and reliable manufacturer of stainless steel pipes in China,Kaysuns can not only help you avoid most mistakes when purchasing stainless steel pipes,but we also offer one-stop piping system services to eliminate all purchasing hurdles for you.Feel free to contact us at any time for a free and quick quote.
Contactez-nous pour plus d'informations
Manufacturing Process for High-Purity Cooling Tubes
KAYSUNS Mechanical and Non-Destructive Leak Testing
- Positive Material Identification (PMI): Handheld X-ray fluorescence spectrometers verify molybdenum and nickel percentages on 100% of tubes.
- Eddy Current Testing (ASTM E426): Automated sensors scan the entire tube length to detect microscopic pinholes or subsurface seams.
- Hydrostatic and Pneumatic Testing: Every pipe withstands high-pressure water or dry nitrogen testing without pressure drop.
- Helium Mass Spectrometer Leak Testing: For prefabricated manifold assemblies, helium testing detects leak rates down to 10⁻⁹ Pa·m³/s.
- MechanicalDestructive Tests: Lab technicians perform flattening, flaring, reverse bending, and tensile tests on every heat batch per EN 10204 3.1.

FAQs
Secondary TCS loops and rack manifolds require an internal surface roughness below 0.8 microns (Bright Annealed). Ultra-high-density GPU systems often specify electropolished tubes with an Ra below 0.4 microns to prevent micro-channel clogging.
Use seamless cold-drawn tubes (ASTM A269) for high-pressure quick disconnects, tight-radius bent tubes, and small instrumentation lines. High-purity laser-welded and cold-worked tubes (ASTM A270) work excellently for straight rack manifolds and CDU distribution headers.
Nous contacter
- RM901 No.22 Tangjiaqiao Road Wenzhou Chine
- +86 577 8551 1171
- [email protected]
- https://www.kaysuns.com/