Перейти к содержимому
Главная " 317 Stainless Steel Flange

317 Stainless Steel Flange

    317 Stainless Steel Flange Supplier: 317, 317L

    317 stainless steel flange is an austenitic stainless steel flange containing 3.0%–4.0% molybdenum.

    317L is a low-carbon version of 317, with carbon content limited to 0.03% or less.

    Both 317 and 317L фланцы из нержавеющей стали are high-molybdenum austenitic stainless steels.They are upgraded versions of the Фланец из нержавеющей стали 316,offering superior corrosion resistance and mechanical strength through increased chromium,nickel,and molybdenum content.
    317 Stainless Steel Flange - Kaysuns WNRF 2'' SCH80S A182 F317L

    Chemical Composition of 317 Stainless Steel Flange (317/L)

    The chemical compositions of 317 and 317L stainless steel flanges are very similar;the key difference lies in their carbon content.The following are typical chemical composition percentages based on ASTM A182.
    ЭлементCCrNiПнMnSiпSNFe
    317≤ 0,08%18.0% – 20.0%11.0% – 15.0%3.0% – 4.0%≤ 2.0%≤ 1.0%≤ 0,045%≤ 0,03%≤ 0,10%Остаток средств
    317L≤ 0,03%18.0% – 20.0%11.0% – 15.0%3.0% – 4.0%≤ 2.0%≤ 1.0%≤ 0,045%≤ 0,03%≤ 0,10%Остаток средств

    Analysis of Ingredient Characteristics

    High Molybdenum Content:
    Grade 317L has a higher molybdenum content than Grade 316,significantly enhancing the flange’s resistance to pitting corrosion in chloride-containing environments and reducing acids.
    Low-carbon Version (317L):
    Reducing the carbon content to below 0.03% prevents the formation of chromium carbide precipitates during welding,thereby avoiding intergranular corrosion in the heat-affected zone.
    High Nickel And Chromium:
    These ensure a stable austenitic structure and provide excellent overall oxidation resistance.

    У вас есть требования?

    Kaysuns является профессиональным поставщиком фланцев из нержавеющей стали 316. Пожалуйста, не стесняйтесь обращаться ко мне, если у вас есть какие-либо требования.

    Свяжитесь с нами для получения дополнительной информации 

    Связаться с нами

    Mechanical Properties of 317 Stainless Steel Flange Series

    317 stainless steel flange and 317L stainless steel flange exhibit good strength and toughness at room temperature.Although their chemical compositions differ slightly,their mechanical property requirements are generally specified uniformly in the ASTM A182 standard.
    Показатели производительности317317L
    Предел прочности≥ 515 МПа (75 ksi)≥ 515 МПа (75 ksi)
    Предел текучести 0,2%≥ 205 МПа (30 ksi)≥ 205 МПа (30 ksi)
    Удлинение в 50 мм≥ 35%≥ 35%
    Твердость≤ 217 HBW(95 HRB)≤ 217 HBW(95 HRB)

    Minor Differences in Practical Application

    Although the standards specify the same minimum strength requirements for both grades,in practice,317 typically has a slightly higher tensile strength than 317L due to its slightly higher carbon content.To compensate for the loss of strength resulting from the lower carbon content,317L sometimes maintains its mechanical properties by making slight adjustments to its nitrogen content.

    4 Manufacturing Methods for 317 Stainless Steel Flange

    Ковка

    Forging is the most commonly used and highest-quality method,and is the preferred choice for high-quality industrial flanges.The forging process eliminates internal porosity and defects in the steel,optimizes grain orientation,and gives the flange the highest compressive strength,toughness,and fatigue resistance.

    Центробежное литье

    Centrifugal casting is primarily used to manufacture large-sized or custom-sized flanges. Compared to conventional sand casting, centrifugal casting produces a denser microstructure, and the central portion of the flange is typically free of porosity. However, its mechanical properties are slightly inferior, and dimensional accuracy is limited.

    Резка пластин

    Plate cutting offers low costs and short production cycles,making it suitable for applications with modest pressure requirements.However,because the cutting process disrupts the original grain orientation of the plate,its pressure-bearing capacity is inferior to that of forgings.

    Раскатка кольца

    Ring rolling can produce flanges with very large diameters while retaining a continuous grain flow similar to that of conventional forging.It should be noted that if a sheet is bent into a ring and then butt-welded,this is classified as the “roll-welding method,” which typically requires 100% X-ray inspection.

    Applications of 317 Stainless Steel Flange (317/L)

    317 Stainless Steel Flange

    • Pulp and Paper Manufacturing
    • Химическая обработка
    • Textile Dyeing Equipment
    • Пищевая промышленность
    • High-Temperature Condensers

    317L Stainless Steel Flange

    • Десульфуризация дымовых газов
    • Marine and Desalination Plants
    • Фармацевтическая промышленность
    • Petrochemical and Refining
    • Explosives Manufacturing

    FAQs About 317 Stainless Steel Flange Grades

    This is because it contains a higher percentage of molybdenum.While 316L contains 2%–3% molybdenum,317L contains 3%–4%. 317L offers better resistance to pitting and crevice corrosion when exposed to chloride-containing solutions or strongly reducing acids.

    Generally,you can substitute 317L for 317 because 317L offers better corrosion resistance and is easier to weld.If the design drawings specify 317L,you should not substitute 317 without careful consideration;unless the welded joint undergoes an expensive post-weld annealing process,it may fail prematurely.

    Of course,you can also use flanges that are rated for both 317 and 317L.As a supplier with over a decade of experience in stainless steel products,Kaysuns can provide you with such flanges.Please feel free to contact us at any time.

    Although 317L offers excellent creep resistance at high temperatures,it does have its limitations.Prolonged exposure to temperatures between 427°C and 816°C may cause metal embrittlement (formation of the σ phase).If your operating conditions consistently exceed 450°C,we recommend consulting a materials engineer to determine whether you need to upgrade to a higher-grade alloy or a nickel-based alloy.

    Связаться с нами

    Свяжитесь с нами
    Найти нас
    Facebook Linkedin Конверт

    сопутствующие товары

    Производитель труб из хастеллоя B3 - Заголовок

    Лучший производитель труб из хастеллоя B3 | без MOQ.

    Трубы из хастеллоя B2 в наличии

    Производитель труб из сплава B2 в Китае | Немедленная поставка.

    Производитель труб из хастеллоя C4 в Китае

    Производитель труб из сплава C4 в Китае | Немедленная поставка.

    логотип кайсунов

    Добро пожаловать к нам

    Поставка
    Нержавеющие и легированные материалы для трубопроводов

    • Нужно предложение?
    • Хотите узнать размеры / каталог?
    • Поговорим о технических проблемах?

    Не стесняйтесь обращаться к нам, и мы с радостью ответим на все ваши вопросы.

    Получить бесплатное предложение прямо сейчас

    small_c_popup.png

    Получите бесплатное предложение прямо сейчас

    Хотите узнать больше? Свяжитесь с нами

    Мы ответим вам в течение 24 часов. Спасибо!