Chloride Attack is a significant threat to the integrity of stainless steel products.This aggressive form of corrosion primarily affects the passive защитный слой of the metal.Understanding this mechanism is vital for any system relying on трубы из нержавеющей стали или фитинги из нержавеющей стали.This type of corrosion is particularly challenging because it is often localized and hidden.
What is Chloride Attack
The Chemistry of Chloride Attack
The protective passivation layer is primarily composed of Cr2О3.Chloride ions are extremely small and highly mobile;they accumulate on the stainless steel surface,particularly in stagnant areas.
- Permeation:Chloride ions chemically react to destroy the Cr2О3 layer,forming soluble metal chloride compounds.
- Active Sites:Once the passivation layer is compromised,“active” corrosion sites emerge.Iron begins to dissolve rapidly within these microscopic regions.
- Acidification:The corrosion process within pits releases hydrogen ions (H+),causing a sharp drop in pH. This acidic environment accelerates localized corrosion.
A simplified chemical reaction for the breakdown of the passive film might look like this:
Cr2О3 + 6Cl– + 6H+ –> 2CrCl3 + 3H2О
Forms of Chloride Attack on Stainless Steel
Точечная коррозия is the most common form of chloride attack.Tiny,deep holes form on the stainless steel surface.These pits are often covered by a cap-like formation created by corrosion products,making them difficult to detect with the naked eye.
Щелевая коррозия occurs in narrow gaps or shielded areas.Examples include spaces under gaskets or tight bolt heads.The stagnant environment allows chlorides to concentrate.This intensifies the localized corrosion rate.
Коррозионное растрескивание под напряжением is a catastrophic failure mode.Its occurrence requires three conditions:high tensile stress,a specific temperature range,and the presence of chlorides.Stress corrosion cracking leads to rapid crack propagation.
Impact on Stainless Steel Pipe and Fittings
- Pipe Failure:Pitting corrosion in stainless steel pipes may lead to perforation,causing pipeline leaks.Leaks of corrosive or flammable fluids pose significant safety risks.
- Fitting Degradation:Stainless steel pipe fittings often exhibit crevices,with локти а также тройники being particularly susceptible to crevice corrosion.Such failures can cause joint rupture under pressure.
- Loss of Structural Integrity:Localized corrosion leads to wall thinning,rendering components unable to withstand rated pressure.This ultimately results in premature system shutdowns and replacements.
- Contamination Risk:Corrosion byproducts may contaminate conveyed fluids,which is unacceptable in industries such as pharmaceuticals or food processing.
Chloride Resistance Comparison
| Оценка | Молибден (%) | PREN Value | Resistance Level |
|---|---|---|---|
| 304 | 0 | ≈ 18 | Бедный |
| 316 | 2.0 – 3.0 | ≈ 25 | Хорошо |
| Дуплекс 2205 | 2.5 – 3.5 | ≈ 35 | Very Good |
| Супер дуплекс 2507 | 3.0 – 5.0 | ≈ 40 | Превосходно |
Preventive Measures
This table outlines key strategies for mitigating chloride attack.Prevention is always better than cure.
| Стратегия | Действие | Выгода |
|---|---|---|
| Выбор класса | Use high PREN alloy | Best defense |
| Отделка поверхности | Polish surfaces | Removes trap sites |
| Temperature Control | Keep temperature low | Slows reaction rate |
| Weld Treatment | Passivate welds | Restores oxide layer |
Selecting stainless steel grades with high PREN values is the optimal defense against chloride attack.Stainless steel pipes used in marine or industrial chillers must be 316 or higher grades.
Additionally,design specifications should eliminate crevices where water may accumulate.Proper послесварочная обработка must be performed to restore corrosion resistance degraded by welding heat.
Связаться с нами
- RM901 No.22 Tangjiaqiao Road Wenzhou Китай
- +86 577 8551 1171
- [email protected]
- https://www.kaysuns.com/
RU 
EN 
ES 
PT 
FR 
