NACE MR0175 / ISO 15156 is the international standard that governs material selection for oil and gas production in sour environments.Specifically,it provides essential requirements for metals exposed to hydrogen sulfide (H2S).For engineers managing high-integrity tuyau en acier inoxydable systems,this standard is a critical safety roadmap.It ensures that materials can withstand aggressive chemical attacks without sudden,catastrophic failure.By following these rules,industries protect both their personnel and the surrounding environment.
The Core of NACE MR0175 / ISO 15156
The standard focuses on preventing material failure in “sour” environments.A sour environment contains water and H2S at specific pressure levels.Under these conditions,standard metals often become brittle and crack.Consequently,the industry created NACE MR0175 to define which alloys are safe for use.
In 2003,NACE joined with ISO to create a unified global standard.Today,ISO 15156 consists of three parts:
- General principles for material selection.
- Requirements for cracking-resistant carbon and low-alloy steels.
- Requirements for cracking-resistant corrosion resistant alloys (CRAs),including various stainless steel grades.
Ce que nous faisons
- Plaque
- Feuille
- Forgeage
- Barre ronde
- Bride
- Tuyaux
- Raccords
- Sur mesure
Contactez-nous pour plus d'informations
The Relationship Between NACE MR0175 and Stainless Steel
NACE MR0175 and Sulfide Stress Cracking
How does it work?When H2S reacts with the steel surface,it releases atomic hydrogen.These tiny atoms penetrate the metal lattice of the stainless steel pipe.Once inside,they collect at grain boundaries and create internal pressure.If the material is too hard or under too much stress,it will snap.NACE MR0175 acts as a shield against this.It specifies the maximum allowable hardness and environmental limits (temperature, pH and chloride levels) to prevent SSC from ever starting.
Material Environmental Limits for Stainless Steels
Note: These limits vary based on the specific pH and application.Always consult the latest edition of the standard for precise engineering.
| Material Category | Grade typique | Température maximale | Max H2S Partial Pressure (psia) | Max Chlorides (mg/L) |
|---|---|---|---|---|
| austénitique | 316L | 60℃ | 140℉ | 15 | 1000 |
| Duplex | 2205 | 232℃ | 449.6℉ | 0.3 | 160,000 |
| Super Duplex | 2507 | 232℃ | 449.6℉ | 3.0 | 160,000 |
| Alliage de nickel | Inconel 625 | No Limit | No Limit | No Limit |
Why Compliance Matters for Piping Systems
- Traçabilité des matériaux :
Every pipe and fitting must have a mill test certificate (MTC).This document proves the chemistry and hardness meet NACE MR0175 requirements. - Fabrication Control:
Welding can increase the hardness of the heat affected zone (HAZ).Compliance requires proper welding procedures to keep the HAZ within safe limits. - Long-Term Reliability:
Using NACE-compliant materials reduces the need for expensive corrosion inhibitors.This leads to a lower lifecycle cost for the asset.
Common Hardness Requirements in NACE MR0175
| Type de composant | Qualité des matériaux | Limite de dureté (HRC) | Standard Requirement |
|---|---|---|---|
| Tube en acier inoxydable | 316/316L | ≤ 22 HRC | Solution Annealed |
| Raccords de tuyauterie | Duplex 2205 | ≤ 28 HRC | Phase balance 40-60% |
| Flanges & Valves | Martensitic 410 | ≤ 22 HRC | Double Tempering required |
| Bolting/Fasteners | B7M / L7M | ≤ 22 HRC | Controlled Stress levels |
Vous voudrez peut-être aussi lire :
Fissuration par corrosion sous contrainte dans l'acier inoxydable
Nous contacter
- RM901 No.22 Tangjiaqiao Road Wenzhou Chine
- +86 577 8551 1171
- [email protected]
- https://www.kaysuns.com/
