ASME PCC-1 provides the industry-standard instructions for assembling bolted bride joints in pressure systems.This document is part of the Post Construction Code (PCC) series from the American Society of Mechanical Engineers.It addresses one of the most common failure points in any facility:the flange interface.
It moves beyond simple “tightening” and introduces a scientific approach to joint integrity.By adhering to these guidelines,companies prevent leaks,reduce emissions and ensure the longevity of their tuyaux et raccords de tuyauterie.
What is the Purpose of ASME PCC-1?
Ce que nous faisons
- Plaque
- Feuille
- Forgeage
- Barre ronde
- Bride
- Tuyaux
- Raccords
- Sur mesure
Contactez-nous pour plus d'informations
Achieving Gasket Stress Under ASME PCC-1
Correct “gasket stress” is central to ASME PCC-1.To form a seal,bolts must compress the gasket into the serrated grooves of the flange.
If stress is too low,fluid will leak past the gasket.
Conversely,if stress is too high,the gasket may be crushed or the flange may deform.
Balancing these factors proves particularly challenging when using corrosion-resistant alloys.While these materials offer high strength,they are prone to galling during tightening.
Therefore,specifications emphasize the use of high-quality lubricants.Proper lubrication ensures that the torque applied to the nut is effectively converted into bolt load rather than lost to friction.
Key Assembly Steps Defined by ASME PCC-1
- Site Inspection:
Technicians must check the flange faces for scratches or piqûre.Even a minor defect can create a leak path for high-pressure gas. - Alignment:
The code mandates that flanges must be parallel.Forcing misaligned pipes together creates “residual stress.” This stress often leads to rupture par fatigue in the future. - Bolting Sequence:
You should never tighten bolts in a simple circular order. Instead,ASME PCC-1 recommends a “Star” or “Cross-pattern” sequence.This ensures that the gasket compresses evenly across the entire surface.
Bolt Tightening Methods and Tools
| Méthode | Accuracy | Common Use Case |
|---|---|---|
| Manual Torque | Modéré | Small diameter pipe fittings |
| Hydraulic Torque | Haut | Large flanges and high-pressure service |
| Bolt Tensioning | Très élevé | Critical joints in offshore or nuclear plants |
| Ultrasonic Measurement | Absolute | Highly sensitive vacuum or toxic gas systems |
Qualifications for Bolting Technicians in ASME PCC-1
Common Torque Values and Lubricant Factors
| Lubricant Type | Typical Nut Factor (K) | Impact on Torque |
|---|---|---|
| Dry / No Lube | 0.20 – 0.30 | High friction;inconsistent bolt load |
| Machine Oil | 0.15 – 0.20 | Moderate performance |
| Molybdenum Disulfide | 0.10 – 0.13 | Consistent;highly recommended by PCC-1 |
| Nickel-Based Anti-Seize | 0.11 – 0.15 | Best for high-temp pipes |
Preventing Long-Term Issues
By implementing this guide,you actively combat common operational failures.For instance,even-load distribution prevents the localized stresses that lead to fissuration sous contrainte due au sulfure in sour service.Furthermore,a properly tensioned joint can withstand the vibrations that typically cause fatigue failure in thinner-walled pipes.
Nous contacter
- RM901 No.22 Tangjiaqiao Road Wenzhou Chine
- +86 577 8551 1171
- [email protected]
- https://www.kaysuns.com/
