Hot Rolling is a primary manufacturing process for steel products.It plays an essential role in creating strong tubos de acero inoxidable y accesorios de tubería de acero inoxidable.The process is fundamental to metal shaping. It significantly reduces the cross-section of the initial material.This prepares the steel for final fabrication.
What is Stainless Steel Hot Rolling?
Hot rolling is a metalworking process.This technique is performed above the recrystallization temperature of steel,utilizing the material’s high-temperature state for shaping.This temperature range prevents work hardening, enabling rapid, large-scale deformation.The process is highly cost-effective and efficient,making it crucial for mass production of materials.
Qué hacemos
- Plato
- Hoja
- Piezas forjadas
- Barra redonda
- Brida
- Tuberías
- Accesorios
- Personalizado
Más información
Key Advantages of Hot Rolling
Metals are easily deformed at high temperatures.This enables rapid continuous rolling.As a result, large quantities of material can be produced quickly.
Hot metal forming requires less energy.This process eliminates the costly work-hardening step,thereby reducing the cost of the final product.
Rolling above the recrystallization temperature refines the internal grain structure,thereby enhancing the material’s ductility.This makes the steel easier to bend and form during subsequent processing.
The hot rolling process can produce steel with extremely large cross-sectional dimensions,which is crucial for thick steel structural components.This process efficiently transforms massive steel ingots into usable shapes.
Key Disadvantages of Hot Rolling
High temperatures cause surface oxidation,forming a rough, scaly surface.This material typically requires subsequent descaling treatment.
Dimensions are difficult to control at high temperatures.The material shrinks as it cools,resulting in lower dimensional accuracy compared to other methods.
Surface oxides (known as scale) form during processing.These oxides must be removed.If scale remains, it may also cause surface defects.
Rapid cooling may result in uneven grain structure.This necessitates post-processing techniques such as annealing.Annealing restores the material’s final properties.
Comparing Hot Rolling and Cold Drawing
| Process | Temperatura | Superficie | Tolerancia |
|---|---|---|---|
| Hot Rolling | Alta | Rough | Wide |
| Dibujo frío | Ambient | Smooth | Tight |
Common Hot Rolled Grades and Products
| Calificación | Característica principal | Aplicaciones |
|---|---|---|
| 304/304L | General corrosion | Pipes, Barras, Bridas |
| 316/316L | Chloride resistance | Fittings, Weld Neck Flanges |
| 321 | Alta temperatura | Piping systems, Codos |
| Dúplex 2205 | High strength | Camisetas, Heavy-wall pipes |
Hot Rolling Process Equipment
| Equipment | Propósito | Usage |
|---|---|---|
| Reheat Furnace | Heat billet | Initial heating |
| Mill Stand | Holds rolls | Applies force |
| Rolls | Shape metal | Deforms material |
| Cooling Bed | Slow cooling | Post-rolling |
Preparation Before Hot Rolling
- Successful hot rolling begins with thorough preparation.The raw material is typically large slabs or ingots.
- First, surface defects are inspected, after which the material is sent to a reheating furnace.Uniform heating is critical,ensuring the steel reaches the correct recrystallization temperature.Proper heating prevents the generation of internal stresses during rolling.
The Steps of Hot Rolling
- First, the rough rolling process is performed to rapidly reduce the material’s cross-sectional area.
- Subsequently, the intermediate rolling process gradually shapes the material closer to its final form.
- Finally, the finishing rolling process achieves the specified dimensions.
Stainless Steel Hot Rolled Products
Hot Rolling is the starting point for many products.Stainless steel pipes often begin as hot-rolled strip or plate.Stainless steel pipe fittings like elbows and tees are manufactured from hot-rolled plates or seamless pipe blanks.Flanges are cut from thick hot-rolled plate.Thus, the quality of the roll determines the quality of the final product.
Ensuring Hot Rolling Quality
Maintaining quality requires strict control.Temperature control is important throughout the process.Rolls must be perfectly aligned and maintained.Online gauge monitoring ensures dimensional stability.However, the finished material still requires post-treatment.This is needed to restore optimal corrosion resistance.
Post-Rolling Treatment
Hot-rolled material needs immediate attention.The rough surface has a layer of scale.This scale is removed through pickling or descaling.Annealing is then performed.This final heat treatment corrects the internal grain structure.Annealing and pickling ensure the stainless steel pipe or fitting achieves its maximum performance.
Contacto
- RM901 No.22 Tangjiaqiao Road Wenzhou China
- +86 577 8551 1171
- [email protected]
- https://www.kaysuns.com/
ES 
EN 
RU 
PT 
FR 
